Not every odour treatment on the market works the same way - and the difference matters more than most homeowners realize.
We recently worked with a family whose daughter, a realtor, helped them buy what looked like the perfect home. There was one detail that should have been a red flag: the home had been treated with ozone shortly before it was shown, on a very short closing timeline. Every time they viewed the property, it smelled fine. It wasn’t until after they moved in that neighbours mentioned the previous owners had been heavy, near-constant smokers.
The smell came back - and worse, the damage went far beyond odour. The ductwork and furnace had to be replaced due to some of the worst contamination seen in the industry. Windows are being replaced. And in the upstairs bathroom, every hot shower makes the freshly painted walls bleed yellow from nicotine trapped underneath.
This is a textbook case of masking versus treating. Here’s the difference between the two technologies at the center of it.
What Is Ozone Treatment?
Ozone (O3) is a reactive gas that can break down some odour-causing compounds through oxidation, similar in principle to chlorine dioxide. In short, controlled applications, it has legitimate uses. The problem is how often it’s used as a fast, temporary cover rather than a complete treatment - especially under time pressure, like a closing date or a showing deadline.
Ozone also has real limitations: it can degrade rubber, foam and certain finishes with extended exposure, and because it reacts so broadly and briefly, it’s easy for a property to smell “treated” immediately afterward without the underlying contamination actually being resolved.
What Is Chlorine Dioxide Treatment?
Chlorine dioxide (ClO2) is also an oxidizer, but it works differently and more thoroughly. It reacts directly with the organic compounds causing an odour - smoke residue, mould, bacteria - breaking the molecules apart at the source rather than briefly reacting with whatever is in the air at that moment.
At Fresh Start® Environments, we typically use chlorine dioxide in two stages: a liquid application on contaminated surfaces, followed by a gas treatment to reach the air and hard-to-access areas. That two-step approach is what allows it to address contamination that’s settled into materials, not just what’s floating in the room when the technician is there.
Why Ozone Can Mask Odour Instead of Eliminating It
The core issue isn’t that ozone “doesn’t work” - it’s that a short ozone treatment can make a property smell clean immediately without resolving what’s actually in the walls, subfloor, ductwork or insulation. Smoke and nicotine residue in particular can sit dormant in materials and re-emerge later, especially with heat and humidity, like a hot shower pulling nicotine back out of bathroom walls.
For a quick turnaround before a showing, that’s a real risk for buyers - the odour, and the underlying contamination, may still be there. It just isn’t noticeable yet.
A Real Example: When Masking Backfires
In the case above, by the time the real extent of the smoke contamination was discovered, the cost of addressing it had grown far beyond what an odour treatment alone would have cost at the point of sale: a full furnace and ductwork replacement, window replacement, and repainted walls that are still bleeding nicotine through in the bathroom.
This is exactly the kind of situation that proper source-focused treatment is meant to prevent - catching the real extent of contamination and treating it thoroughly, rather than covering it up on a deadline.
Chlorine Dioxide vs. Ozone: Key Differences
- What it targets: Chlorine dioxide reacts directly with odour-causing compounds in materials; ozone reacts broadly and briefly with whatever is present in the air and on surfaces during treatment.
- How long it lasts: Chlorine dioxide treatment is designed to permanently break down the molecules responsible for an odour; ozone’s effects can be temporary if the underlying contamination in materials isn’t fully addressed.
- Material safety: Chlorine dioxide is generally gentler on finishes and materials; ozone can degrade rubber, foam and certain surfaces with repeated or extended exposure.
- Best used for: Chlorine dioxide is well suited to smoke, mould and organic odours that have settled into materials; ozone has a narrower set of appropriate, professionally controlled uses.
Which Treatment Is Right for Your Property?
Every odour situation is different, and the right treatment depends on the source, the materials involved, and how long the contamination has had to settle in. That’s also why Fresh Start® Environments doesn’t claim one single technology solves every odour problem - it’s why we focus on chlorine dioxide as our core technology, and why a proper assessment matters before any treatment begins.
If a property smells “fine” after a fast treatment right before a sale or move-in, that’s worth a second look, not a reason for comfort.
Frequently Asked Questions About Ozone and Chlorine Dioxide
Is ozone treatment bad for odour removal? Ozone has legitimate, controlled uses, but short ozone treatments are often used as a fast cover for odour rather than a complete treatment. It can make a property smell clean immediately without resolving contamination that has settled into materials like drywall, ductwork or subflooring.
Why did the smoke smell come back after ozone treatment? Smoke and nicotine residue can sit in porous materials well below the surface. A brief ozone treatment can neutralize what’s in the air at the time, but residue left in walls, ductwork and other materials can re-emerge later, especially with heat and humidity.
Is chlorine dioxide safer than ozone? Chlorine dioxide is generally gentler on materials and finishes than ozone, which can degrade rubber, foam and certain surfaces with extended exposure. Both are professional-grade treatments that should be applied by trained technicians.
How is chlorine dioxide treatment different from just airing out a house? Airing out a property only removes what’s currently in the air. Chlorine dioxide reacts directly with the odour-causing compounds in materials, breaking them down so they can’t continue producing odour the way trapped residue can.
Can I tell if a property was treated with ozone before I bought it? Not easily. Ozone leaves no visible trace once the treatment is complete, which is part of why it can be misused as a quick fix before a sale. If a property smells unusually clean right before closing on a short timeline, a professional odour assessment is a reasonable precaution.
The Bottom Line
A property that smells clean isn’t the same as a property that’s actually been treated. Ozone can mask odour quickly, but chlorine dioxide is built to eliminate it at the source - which is why Fresh Start® Environments uses chlorine dioxide as our core technology for smoke, mould and other persistent odours across Milton, ON and Canada.
If you’re buying a property, preparing one for sale, or dealing with an odour that keeps returning no matter what you try, contact Fresh Start® Environments for a proper assessment, or learn more about how chlorine dioxide works. For smoke-specific odour problems, see our Smoke Odour Removal page.